Cover of Electric Motor Manufacturing Engineering: Engineering Stator Lamination, Winding, Magnet Assembly, Rotor Balancing, Impregnation, Testing, and Product by Viremont, Caldren, ISBN 9798172430640
Electronics

Electric Motor Manufacturing Engineering: Engineering Stator Lamination, Winding, Magnet Assembly, Rotor Balancing, Impregnation, Testing, and Product

Contributor(s): Author Format: Paperback

Paperback ยท ISBN 9798172430640

โ‚น1,613 13%
โ‚น1,861

Inclusive of GST and other taxes

100% Quality Assurance
No Account Creation Required
Fast Delivery
Secured Transactions

Arriving at your doorstep in 10-15 days

Our logisitcs team will make sure everyitem is delivered safely

Key Specifications

ISBN 9798172430640
Publisher Independently published
Publication date September 2026
Language English
MRP ยฃ14.43 GBP
Page count 260
Item weight 135 g

A practical engineering guide to building reliable electric motors at production scale. This book connects motor design intent with the materials, equipment, process controls, inspection methods, and factory decisions required to achieve consistent output. It is written for manufacturing engineers, process engineers, quality professionals, production leaders, and designers responsible for turning a motor concept into a capable, traceable manufacturing process.

Coverage follows the complete production route, from electrical-steel selection and stator lamination through winding, magnet assembly, rotor balancing, impregnation, final assembly, testing, and yield improvement. Each topic explains not only what the process does, but also which variables influence performance, durability, safety, cost, and repeatability.

What the book covers
  1. Manufacturing requirements and architecture: Translate electrical, mechanical, thermal, and performance specifications into practical production requirements. Examine motor topologies, interfaces, design-for-manufacture principles, documentation, and change control.
  2. Materials and core production: Select electrical-steel grades and coatings, manage material identification and storage, control punching and burrs, and establish reliable stacking, skewing, bonding, welding, and compression practices.
  3. Stator preparation and winding: Address slot liners, wedges, phase insulation, terminal preparation, wire and enamel systems, concentrated and distributed windings, hairpins, form windings, tension control, insertion, end-turn forming, and mechanical support.
  4. Electrical quality assurance: Review conductor joining, polarity and phase verification, resistance and inductance checks, insulation resistance, dielectric withstand, surge testing, partial discharge, corona protection, and failure containment.
  5. Permanent-magnet and rotor engineering: Cover magnet selection, safe handling, orientation, adhesive application, curing, placement accuracy, polarity inspection, retention systems, shaft fits, machining, runout, and datum control.
  6. Balancing and mechanical verification: Explain static and dynamic balancing, correction methods, balance grades, overspeed testing, containment, vibration measurement, and diagnostic acceptance criteria.
  7. Impregnation and thermal processing: Compare dip-and-bake, vacuum-pressure impregnation, and trickle methods. Control resin condition, moisture, viscosity, cure uniformity, void reduction, heat transfer, noise, and rework decisions.
  8. Assembly and production testing: Manage housings, bearings, seals, air gaps, fasteners, sensors, connectors, torque control, no-load and load tests, efficiency, torque-speed performance, noise, vibration, and temperature rise.
  9. Yield and factory integration: Apply first-pass yield accounting, process capability, control plans, SPC, gauge R&R, Pareto analysis, root-cause methods, automation, vision inspection, standardized work, safety controls, pilot builds, run-at-rate validation, and traceability.

Practical defect analysis and corrective-action guidance help readers connect process symptoms to likely causes and appropriate controls. The result is a usable reference for improving consistency, reducing scrap and rework, strengthening audit readiness, and releasing motor manufacturing processes with greater confidence.

Ideal for teams working across product design, tooling, production, quality, testing, maintenance, and factory validation.